Uniden DECT2088 Spécifications télécharger pdf (Page 17)

Installing the Phone

Place the mounting slots over the

pins on the wall plate.

Slide the base

down to lock it

into place.

Wall plate

On the base unit, pull the handset

retainer out of the slot.

Rotate it clockwise 180 degrees and

flip the retainer from front to back.

Slide it back into the slot.

The retainer holds the corded

handset in place.

(To AC outlet)

Notes: Mounting the phone directly on the wall

Be sure the wall is capable of supporting the weight

of the phone, and use the proper type of anchoring

device for the wall material.

Insert two #10 screws (minimum length of 1

inches, not supplied) into the wall, 3

inches

apart.

Leave the screw heads

inch away from the wall to

allow room for mounting the phone.

Align the mounting slots over the screws and slide

the base down into place as shown above.

•

UC517BH(DECT2088) book OM 2.indb16 16 1/9/2008 11:07:38 AM

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 71 72

Pas de commentaire

Uniden DECT2088 Spécifications Page 17