Uniden PRO630XL Manuel d'utilisateur télécharger pdf (Page 13)

UNIDEN Model PRO630XL

Connecting the Microphone

Front MIC Jack

Push the MIC plug at the end of the microphone into the MIC Jack until the connection locks

into place. Gently tug the MIC cord to test that the connection is locked. Use the Front MIC Jack

cover which is threaded onto the MIC cord to seal the MIC Jack entry from dust.

Disconnecting the MIC from the Front MIC Jack

Pull away the threaded rubber collar and move it down along the cord. Using the at blade of a

screwdriver or similar object carefully press the lock tab at the bottom side of the MIC plug and

push it upwards. At the same time tug on the MIC cord to draw back the MIC plug.

Rear MIC Jack

Use the Rear MIC Jack if the main base is mounted where a Front MIC connection is intrusive

or if you wish to use Standard Microphone with the extension cable.

Peel the dust cover from the Rear MIC Jack. Push the MIC plug at the end of the microphone,

or extension cable if using the extension cable into the MIC Jack until the connection locks into

place.

The Front and Rear MIC Jacks can not be used at the same time.

Front MIC Jack Rear MIC Jack

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Pas de commentaire

Uniden PRO630XL Manuel d'utilisateur Page 13