Uniden BW2101 Spécifications télécharger pdf (Page 7)

2. Mount the camera onto the bracket,

but do not tighten.

3. Adjust the camera to the proper

view angle. Make sure the lens is

upright relative to your subject. Then

tighten the lock nut to secure the

camera.

Wall mount option

1. Select the position for the mount

stand and mark out the mount holes.

The two wall screws should be

spaced 40mm apart. Screws and

anchors are supplied, but if

necessary use an appropriate screw

type for the mounting surface.

Desktop mount option

1. Select the position for the camera

and secure the camera stand.

Installing the Camera on the Goose Neck Mount Stand

5. At the LCD monitor adjust the

antenna to an upright position.

4. Connect the AC adaptor and route

the cord along the guides in the

stand.

Getting Started (cont’d)

Use the goose neck mount stand to install the camera at an appropriate angle

in a semi-permanent (desktop mount option) or permanent (wall mount option)

location.

NOTE! Ensure the install location is within range of a 240VAC wall outlet.

locknut

cord guides

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Pas de commentaire

Uniden BW2101 Spécifications Page 7