Uniden BC248CLT Manuel d'utilisateur télécharger pdf (Page 35)

Problem Solution

■

Check the connections at both ends of the

AC Adapter.

■

Turn on the wall switch of your room.

You could be using an outlet controlled by the

wall switch.

■

Move the AC Adapter to another wall outlet.

■

Scanner won’t power up.

■

Poor reception.

■

Check antenna connection.

■

Move the antenna.

■

If the programmed frequency is higher than

406MHz, a shorter antenna length may improve

the reception.

■

Relocate the scanner.

■

You may be in a fringe area. This could require

an optional multi-band antenna. Check with your

dealer or local electronics store.

■

Scan won’t start.

■

Press the SCAN key again.

■

Adjust the Squelch control.

■

Check to see if 50 channels are locked out. If so,

unlock the channels as needed.

If your BC248CLT is not performing properly, try the following steps.

TROUBLESHOOTING

BC248clt.qxd 3/8/00 7:19 PM Page 32

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 41 42

Pas de commentaire

Uniden BC248CLT Manuel d'utilisateur Page 35