Uniden APCO 25 Manuel du propriétaire Page 127
- Page / 140
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Appendix
126
conversations with ID’s assigned to the block you just
programmed, then you’ve probably selected the right
size code and can work on the next block of the map.
Finally, for most public safety systems there are some
size codes which are more common. S-3 and S-4 are
probably the most common, followed by S-10, S-11,
and S-12.
If you select size code S-12, S-13, or S-14, there are
some restrictions as to which blocks can be used for
these codes.
S-12 can only be assigned to Blocks 0, 2, 4, or 6.
S-13 can only be assigned to Blocks 0 and 4.
S-14 can only be assigned to Block 0.
Since these size codes require multiple blocks, you
will be prompted for the next available block when
pro-gramming a fleet map. For example, if you assign
Block 0 as an S-12, you will be prompted for b2, the
next block available, instead of b1. And if you assign
Block 0 as an S-14, you would not see another prompt
because it uses all available blocks.
Size Code Restrictions
- OWNER'S MANUAL 1
- Precautions 2
- WARNING! 3
- Contents 4
- Introduction 8
- Feature Highlights 10
- Trunk Tracking 11
- Auto Store 12
- Priority 12
- Backlight and Power 13
- Key Controls 13
- PC Control and Cloning 13
- About This Manual 14
- Entering Text 14
- Represented in This Manual 15
- Understanding Scanning 17
- What is Searching? 18
- What is CTCSS/DCS? 18
- Conventional Scanning 20
- Simplex Operation 21
- Repeater Operation 21
- What is Trunk Tracking? 21
- Trunked Scanning 22
- Types of Trunking Systems 23
- EDACS Trunking 25
- LTR Trunking 26
- I-Call (Motorola/EDACS) 27
- Where To Get More Information 27
- Information On The Internet 27
- UBCD396T 28
- Setting Up Your Scanner 29
- Using Rechargeable Batteries 30
- Removing the Display Sticker 31
- Using AC Power 31
- Connecting the Antenna 32
- Attaching the Belt Clip 33
- Attaching the Wrist Strap 33
- A Look At The Keypad 33
- A Look At The Display 36
- Using Menu 38
- Using Func 38
- Brisbane 39
- Scanning Systems 40
- Selecting Systems to Scan 41
- Locking/Unlocking Systems 42
- Locking/Unlocking Channels 42
- ID Scan/ID Search Mode 43
- Holding On a Channel 43
- Basic Operation 44
- Quickly Recalling Channels 45
- Monitoring Trunking Activity 45
- Toggling Channel Alpha Tags 45
- Using The Menu 46
- Using the Menu 47
- Programming Systems Menu 48
- Other Settings 50
- Turning Power Save On or Off 51
- Priority Scan 51
- Using the Backlight 51
- Setting the Audio AGC 52
- Computer 53
- Using the Cloning Options 54
- Wired Cloning 54
- On-Air Cloning 55
- Programming Radio Systems 57
- Entering/Editing Conventional 58
- Channel Groups 58
- Setting Up a Channel Group 58
- Programming Motorola Systems 60
- Setting System Frequencies 61
- Setting Modulation 62
- Programming EDACS Systems 64
- Programming LTR Systems 67
- Talkgroups 69
- System-Level Settings 71
- Editing the System Name 71
- Editing the System Quick Key 72
- Setting System Lockout 72
- Setting the System Hold Time 73
- Setting ID Scan/Search 74
- (Trunked Systems Only) 74
- Setting the Band Plan 75
- Editing the Fleet Map 76
- (Motorola Systems Only) 76
- Setting I-Call 78
- Setting Emergency Alert 79
- Setting Control-Channel Only 79
- Clearing All Locked-Out IDs 80
- Adjusting the P25 Level 80
- Setting the EDACS ID Format 81
- (EDACS Systems Only) 81
- Setting System Attenuation 82
- Deleting Systems 82
- Copying Systems 82
- Group-Level Settings 83
- Channel-Level Settings 85
- Editing the Channel Name 85
- Editing Frequencies 86
- (Conventional Channels Only) 86
- Setting Channel Priority 86
- Setting Channel Alert 87
- Channels Only) 87
- Setting CTCSS/DCS 88
- Setting the System Frequency 89
- Modulation 89
- Setting Channel Attenuation 89
- Setting Channel Lockout 90
- Deleting Channels 91
- Copying/Pasting Channels 91
- Searching And Storing 92
- Quick Search 93
- CTCSS/DCS Search 93
- Custom Search 94
- Editing a Custom Search Range 95
- Editing a Service Search 96
- Auto Search and Store 97
- Selecting a System 98
- Storing a Conventional System 98
- Storing a Trunked System 99
- Optimizing P25 Performance 100
- Using The Close Call Feature 101
- Setting Close Call Options 102
- Using the Close Call Feature 103
- Close Call Hits 104
- Search And Close Call Options 105
- Search and Close Call Options 106
- Finding Repeater Output 107
- Frequencies 107
- Setting the Modulation Type 108
- Setting Attenuation 108
- Setting Data Skip 109
- Setting the Delay Time 110
- Using Tone-out 111
- Using Tone-Out 112
- Care And Maintenance 114
- Care and Maintenance 115
- Troubleshooting 116
- (continued) 117
- Specifications 120
- Optional Accessories 123
- Appendix 124
- Preset Map 9 Preset Map 10 125
- Preset Map 11 Preset Map 12 125
- Preset Map 13 Preset Map 14 125
- Preset Map 15 Preset Map 16 125
- User Defined Fleet Maps 126
- Size Code Restrictions 127
- Planning 128
- System Name and Quick Key 131
- System Type 131
- For Motorola VHF/UHF system 132
- For Motorola P25 system 132
- System Name Group Name 134
- Conventional System Worksheet 134
- Motorola System Worksheet 135
- Group Quick Key 136
- Talk Group ID Alpha Tag Alert 136
- Motorola System W orksheet 2 136
- LTR/EDACS System Worksheet 137
- LTR/EDACS System W orksheet 2 138
- One Year Limited Warranty 139
- Printed in China 140
- UBZZ01328AZ(0) 140
Produits connexes et manuels pour Les radios bidirectionnelles Uniden APCO 25
(56 pages)
(36 pages)© 2020, manymanuals.fr. Tous droits réservés | 1.350 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels