Uniden BC246T Manuel du propriétaire télécharger pdf (Page 40)

Basic Operation

Turning On the Scanner and

Setting the Squelch

Note: Make sure the scanner's antenna is connected

before you turn it on.

1. Turn Sql fully counterclockwise.

2. Press and hold for about 2 seconds to turn on the

scanner, then turn Vol clockwise until you hear a hiss-

ing sound.

3. Turn Sql clockwise until the hissing stops.

Scanning Systems

To begin scanning programmed systems, press Scan.

The BC246T scans all unlocked systems in all activated

quick-key groups.

Notes:

• If no systems are programmed, or all systems are

locked out, an error message appears. Program a

system or select a system to scan.

• When scanning multiple systems, the BC246T scans

systems according to the assigned quick key.

Systems assigned to quick key 1 are scanned first,

then 2, 3, 4, etc. Systems not assigned to a quick key

are scanned last. Within a quick key, systems are

scanned in the order they were assigned.

• Within a system, channels are scanned according to

the assigned channel group, with the same priority as

described above for systems.

• The BC246T scans a system for the duration you set

using the System Hold Time option (see

“Setting the

System Hold Time” on Page 63). For trunked sys-

tems, the scanner moves to the next system after the

hold time expires, the current transmission ends, and

the channel delay expires. Conventional systems

Vol Sql

Sql

Vol

Scroll

Control

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 127 128

Pas de commentaire

Uniden BC246T Manuel du propriétaire Page 40