Uniden UH8010NB Manuel du propriétaire Page 1

UH8010NBMini CompactUHF CB Transceiver For more exciting new products please visit our website:Australia: www.uniden.com.auNew Zealand: www.uniden.co.

10UNIDEN UH8010NB UHF CB TransceiverTurning on the PowerPress and hold the Power/Channel Selector.OperationNOTELow-Voltage/High-Voltage AlertIfthepo

11OperationThink of the squelch control as a gate. If you increase the squelch level to maximum it raises the ‘Squelch gate’ so only the strongest sig

12UNIDEN UH8010NB UHF CB TransceiverOperationMonitorPress and hold to open the squelch and receive all weak signals.Press and hold again to cancel.

13OperationRecalling the Instant ChannelMomentarily press [INST] on the microphone at any time to return to the Instant Channel. Press [INST] again to

14UNIDEN UH8010NB UHF CB TransceiverOperationStandard Operation without the aid of a Repeater station. Operation with the aid of a Repeater Repeater S

15OperationOperating the UHF CB Radio in Duplex ModeFor this example we are adopting CH01 as the channel being used in your area for repeater use.1. P

16UNIDEN UH8010NB UHF CB TransceiverOperation2. To deactivate SCAN, press .Open Scan (OS) ModeAllows continuous scanning of all selected channels. If

17OperationIf the Priority Channel becomes active the radio will stay on that channel for as long as the signal is present. If the received signal cea

18UNIDEN UH8010NB UHF CB TransceiverOperationBusy Channel LockoutIf the channel is already in use, you can prevent the UHF CB Radio from transmitting

19OperationRoger Beep1. Press 6times.Therogerbeepsettingashes.2. Turn the Channel Selector or press / to change the setting between ON o

Introduction 3Controls & Connectors 4Indicators 6Included with your UH8010NB Transceiver 7Connecting the Microphone 8Mounting the MIC Hanger 9

20UNIDEN UH8010NB UHF CB TransceiverOperationBacklight Brightness1. Press 9times.TheBacklightBrightnesssettingashes.2. Turn the Channel Selec

21CTCSS codes tableUNIDEN UH8010NB UHF CB TransceiverCode No. Frequency (Hz) Code No. Frequency (Hz)“oF’ OFF 20 131.81 67.0 21 136.52 71.9 22 141.33 7

22UNIDEN UH8010NB UHF CB TransceiverDCS codes tableCode No.DCS Code(Octal)Code No.DCS Code(Octal)Code No.DCS Code(Octal)1 023 36 223 71 4452 025 37 22

23UHF CB Channel GuidelinesNOTEAlways listen on a channel (or observe the receive signal level meter) to ensure it is not already being used before tr

24UNIDEN UH8010NB UHF CB TransceiverUHF CB Channels & FrequenciesCH No.Simplex Mode Transmit / Receive Frequency (MHz)Duplex ModeTransmit Frequenc

25UHF CB Channels & FrequenciesUNIDEN UH8010NB UHF CB TransceiverCH No.Simplex Mode Transmit / Receive Frequency (MHz)Duplex ModeTransmit Frequenc

26WarrantyUNIDEN UH8010NB UHF CB TransceiverUNIDEN UH8010NB UHF CB TransceiverIMPORTANT: Satisfactory evidence of the original purchase is required fo

27WarrantyUNIDEN UH8010NB UHF CB TransceiverStatement of Remedy: If the Product is found not to conform to this warranty as stated above, the Warranto

THANK YOU FOR BUYING A UNIDEN PRODUCT.© 2014 Uniden Australia Pty Limited. Uniden New Zealand Ltd. Printed in Vietnam.: U01UT945EZZ(0)

SpecificationsFrequency : 476.42-477.40 MHzGain : 6.5dBVSWR : <1.5:1 for band aboveAntenna Length : 950 mmImpedance : 50 OhmPola

The Uniden UH8010NB is designed to provide you with years of trouble free service. Its rugged components and materials are capable of withstanding har

Congratulations on having selected the AT-870 477 MHz Antenna. This antenna system will allow you to gain good performance in all types of

4Controls & Connectors68910725 4 31131516141112UNIDEN UH8010NB UHF CB Transceiver

1 Menu Button / Monitor function (press & hold)2 PUSH control - Squelch Select (press) /Power On/Off (press & hold) ROTARY control

1 - Receive Signal Level (Channel Busy Indicator) - Transmit Signal Power Level2 - Channel Number / Menu Item Setting3 - CTCSS/DCS Code num

Optional Accessories:• DECTMICkit• UHFAntenna• ExternalSpeakerVisittheUH8010NBpageonthewebsiteformoreinformationontheavailability o

MIC JackPush the MIC plug at the end of the microphone into the MIC jack until the connection locks into place. Gently tug the MIC cord to test that t

The Microphone Hanger comes in two parts. How and where you mount the MIC hanger will determine which parts to use.Conventional Mounting with ScrewsUs