Uniden UH8010NB Manuel du propriétaire télécharger pdf (Page 10)

UNIDEN UH8010NB UHF CB Transceiver

Turning on the Power

Press and hold the Power/Channel Selector.

Operation

NOTE

Low-Voltage/High-Voltage Alert

Ifthepowersupplyvoltageexceeds18VDC,analerttone

sounds and dc HIashesfor5seconds.Thepowersource

mustnotexceed25VDCotherwisepermanentdamage

may occur to your radio, which may not be covered by the

manufacturer’s warranty.

Iftheinputvoltagefallsbelow10VDC,dc Loashesfor5

seconds. The power turns off automatically if voltage falls

below8.5VDC.

Switch your UH8010NB OFF and disconnect it from the power

source, before locating the cause of the power supply problem.

Setting the Squelch Level

Press the Power/Channel Selector momentarily. SqL shows and the

currentsquelchlevelwillash.

Turn the Channel Selector to select the desired squelch level.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 29 30

Pas de commentaire

Uniden UH8010NB Manuel du propriétaire Page 10