Uniden WHAMx4BK Manuel de l'opérateur télécharger pdf (Page 16)

Vivace Boat Information Book Web Version (BIB) (Rev February 13, 2014)

Revision 6 Page | 16

Note

The old mainsail (now the spare) required special precautions to avoid

tensioning sail slides against the mast track stop screw. The

configuration of the new (2013) mainsail eliminates this concern and no

special action is required when setting the Cunningham.

9. Attach the Cunningham to the reefing ring on the mainsail port side with

the hook pointed OUT, away from the sail.

10. Close the main halyard rope clutch.

11. Hoist the mainsail. The leech may tension before the luff.

12. The vang must be carefully balanced against the halyard during re-hoist.

a. If tension on mainsail leech is too great, this indicates that the vang

is too tight and the luff cannot be fully tensioned. Ease the vang

slightly.

Cunningham hook

points AWAY FROM

sail.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 73 74

Pas de commentaire

Uniden WHAMx4BK Manuel de l'opérateur Page 16