Uniden EXI 4246 Manuel d'utilisateur télécharger pdf (Page 10)

INSTALLING THE PHONE [9]

www.uniden.com

B. Install the Rechargeable Battery Pack into the Handset

The handset is powered by a rechargeable battery pack.

The battery recharges automatically when the handset is placed

in the base unit.

1) Press down on the handset battery case cover (use the

finger indention for a better grip) and slide the cover

downward to remove.

2) Plug the battery pack connector (red & black wires) into the

jack inside the battery compartment.

(The connector notches fit into the grooves of the jack only

one way.) Match the wire colors to the polarity label in the

battery compartment, connect the battery and listen for a

click to insure connection.

3) Make sure you have a good connection by slightly pulling on

the battery wires. If the connection is secure, the battery

jack will remain in place.

4) Place the battery case cover back in the handset by sliding

it upwards until it clicks into place.

Use only the Uniden

(BT-905 or BT-1006)

rechargeable battery

pack supplied with your

cordless telephone.

INSTALLING THE

PHONE

UP078.book Page 9 Thursday, December 14, 2006 1:58 PM

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 46 47

Pas de commentaire

Uniden EXI 4246 Manuel d'utilisateur Page 10