Uniden EXI 4246 Manuel d'utilisateur télécharger pdf (Page 13)

[12] INSTALLING THE PHONE

www.uniden.com

Direct wall mounting

If you don't have a standard wall plate, you can mount your phone

directly to the wall. Before doing this, consider the following:

• Avoid electrical cables, pipes, or other items behind the mounting

location that could cause a hazard when inserting screws into the

wall.

• Try to mount your phone within 5 feet of a working phone jack to

avoid excessive cord lengths.

• Make sure the wall material is capable of supporting the weight of

the base and handset.

• Use #10 screws (minimum length of 1-3/8 inches) with anchoring

devices suitable for the wall material where the base unit will be

placed.

1) Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-

15/16 inches apart. Allow about 1/8 of an inch between the wall and screw heads for

mounting the phone.

2) Refer to steps 1 through 5 on page 11 to mount the telephone.

Installing the Beltclip

To attach the beltclip

Insert the beltclip into the holes on each side of the handset. Press down until it clicks.

To remove the beltclip

Pull both sides of the beltclip to release the tabs from the holes.

INSTALLING THE

PHONE

UP078.book Page 12 Thursday, December 14, 2006 1:58 PM

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 46 47

Pas de commentaire

Uniden EXI 4246 Manuel d'utilisateur Page 13